FSP 300W Industrial ATX PSU FSP-300-60ATV — 20+4P MB × 2 + Molex × 3 + SATA × 3 - Power Supply

FSP 300W Industrial ATX Power Supply FSP300-60ATV | Advantech IPC-610 / Norco Rackmount / Industrial PC (20+4P × 2 + Molex × 3 + SATA × 3 + FDD × 1)

OEM-compatible new FSP 300W ATX12V 2.0 industrial power supply — suitable for Advantech IPC-610 series, Norco rackmount chassis, EVOC, Yanxiang, and other standard ATX industrial PCs
FSP model number: FSP300-60ATV — cross-compatible with FSP300-60PLN, FSP300-60PFN, FSP300-60THA within the same ATX12V 2.0 platform family
Connector layout: 20+4-Pin Main (×2) + Molex 4-Pin (×3) + SATA (×3) + FDD 4-Pin (×1) — full-coverage harness for legacy and modern industrial boards
Dual 20+4-Pin main connectors — supports both 20-pin and 24-pin ATX motherboard configurations
Active PFC (Power Factor Correction) — meets EN61000-3-2 requirements for industrial deployments in regulated environments
Thermal fan speed control (Noise Killer) — internal 80mm 12V DC fan, variable speed under load
Built-in OVP / OCP / SCP protection — 100% Hi-pot, ATE, and burn-in tested at factory; re-settable power shutdown
Manual voltage selector — 115V / 230V switchable; suitable for Malaysian 240V mains supply (set to 230V)
Certifications: UL 60950, TUV, IEC 60950, NEMKO (CB Report), FCC Part 15 Class B, CISPR 22 Class B

Brand	FSP (Fortron Source Power) / Sparkle Power
Condition	OEM Compatible — New
PSU Model	FSP300-60ATV
Also Known As	FSP300-60PLN / FSP300-60PFN / FSP300-60THA
Wattage	300W MAX
Input Voltage	115Vrms / 230Vrms — Manual selector; 47–63 Hz
Input Current	7A (RMS) @ 115V / 4A (RMS) @ 230V
Output	+3.3V @ 28A \| +5V @ 30A \| +12V @ 15A \| -12V @ 0.8A \| -5V @ 0.3A \| +5VSB @ 2A \| 300W MAX
Form Factor	ATX12V 2.0 — Standard ATX (approx. 150 × 140 × 86 mm)
Connector Type	20+4-Pin Main (×2) + Molex 4-Pin (×3) + SATA (×3) + FDD 4-Pin (×1)
Fan	80mm 12V DC — Thermal speed control (Noise Killer)
Hot Plug	No
Protection	OVP / OCP / SCP — Re-settable power shutdown
Certifications	UL 60950 / TUV / IEC 60950 / NEMKO (CB) / FCC Class B / CISPR 22 Class B
PFC	Active PFC — EN61000-3-2 compliant

Advantech IPC Series:

Norco Rackmount Chassis:

EVOC / Yanxiang Industrial PC:

General Industrial Applications:

⚠️ Always verify the PSU model number on your existing unit label before ordering.

3-month replacement warranty
Covers manufacturing defects; physical damage and improper installation not included

Manual voltage selector switch must be set to 230V for Malaysian 240V mains supply before powering on — incorrect setting will damage the PSU and connected hardware.
Dual 20+4-Pin main connectors allow this PSU to serve both legacy 20-pin ATX boards and modern 24-pin ATX boards from a single unit.
Cross-compatible with FSP300-60PLN, FSP300-60PFN, and FSP300-60THA — verify your existing PSU model label before ordering; the connector harness layout must match your chassis.
Standard ATX12V 2.0 form factor — fits any chassis with a standard ATX PSU bay; non-proprietary design.
OEM compatible unit — new, unregistered stock; not refurbished or previously installed.